Chrome effect, illuminated arcade button. Each button comes complete with a fixing ring, bulb holder, spacer, microswitch and 5V or 12V LED. If you decide to illuminate the LED supplied with this arcade button, you will need a 5V or 12V power supply depending on the LED option you choose. This can be taken from a spare molex connector (5V red wire or 12V yellow wire) on a PC power supply or a Jamma PSU. This button will mount in a 24mm to 28mm hole.

What's included with these buttons?
1 x Fixing ring
1 x Spacer
1 x LED (5V OR 12V)
1 x Bulb holder
1 x Microswitch

Microswitch options:

Customers can choose from 3 microswitch options for this button. If you want the absolute best microswitch option, the Cherry D44X is the one to choose. The Cherry D44X microswitches are very high quality and feature a soft click and low actuation force.

Product Dimensions:
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 32mm
* Maximum depth of button from top of plunger to bottom of microswitch: 65mm

Wiring Information:
These buttons require 4.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3mm crimped wires for illuminating.
1 wire for the positive connection and 1 wire for the negative connection.